High - Effeciency Full Automatic Gi Wire Net Making Machine
It consists of straightening frame and straightening wheel, and is mainly used for longitudinal tendon straightening, which is made of round steel, carbonized from 45 steel and heat treated to the hardness of 60 steel, where the straightening wheel size, distance and depth of the groove are closely calculated to improve the straightening quality. The up and down straight nut can adjust the size of the gap according to the wire size. The overall design is easy for manual operation, and the quality is guaranteed.
Welding host: 1. Working principle: the air compressor makes air to the reservoir, and the PLC connects and controls the solenoid valve through multiple lines, so that the air in the reservoir tank enters the small gas tank of the equipment, passes the pressure regulating valve, the solenoid valve and power through the trachea, and conducts lower pressure welding to the cylinder.
| No. | Item Name | Parameter | Note |
| Power condition | Voltage and Frequency | 380V 3phase 50HZ | Intelligent circuit breaker is not suggested the distance to the transformer≦50m |
| Outer voltage range | ±10% |
| Outer transformer | 250KVA |
| Cable specification | 180mm²*3 Pin Cooper wire |
| Air condition | Air compressor | screw type | 0.6-0.8mpa Distance 3m |
| Air production | 3.4m³/min |
| Air tank capacity | 1m³ | Around machine |
| Cooling | Water pool capacity | 1m³ | Clean water for industry |
| Lifting distance ,Water pressure | 0.2-0.3mpa 25-30m Lifting |
Comprising of several groups of wire straightening units, each group has two pairs of straightening wheels inclined in the opposite direction. The unique straightening machine is suitable for straightening steel wire with different diameters, each unit is 5 straightening wheels, each straightening wheel is made of alloy steel and heat treatment and corrosion prevention treatment, overall wear and corrosion resistance, adapted to straightening low-carbon cold wire pulling, galvanized wire, etc.;
Different diameter wires can be well straightened, only need to adjust the spacing between the upper and lower two sets of straightening wheels.
Product Tags:
|
|
Customized Dia 1.5-3mm Gi Net Making Machine Mesh Hole 25x25mm Images
|
